Mandolin and banjo

Irish tenor banjo tuner

G2 D3 A3 E4

Mandolin and banjo irish tenor banjo tuning is G2 D3 A3 E4, from G2 at 98 Hz up to E4 at 329.63 Hz. Play a string and this page tells you which one it is and how far out you are.

What it is for: Irish traditional music. Fifths, like a mandolin an octave lower.

Loading the tuner…

Irish tenor banjo string notes and frequencies

At the standard reference pitch of A = 440 Hz. The tuner can be set from 415 to 446.
StringNoteFrequency
4th GG298 Hz
3rd DD3146.83 Hz
2nd AA3220 Hz
1st EE4329.63 Hz

How to tune to Irish tenor banjo

  1. Press Start tuning and allow the microphone.
  2. Play the 4th G on its own and let it ring. Adjust until it reads G2. Flat means wind the peg to raise it; sharp means lower it.
  3. Play the 3rd D on its own and let it ring. Adjust until it reads D3. Flat means wind the peg to raise it; sharp means lower it.
  4. Play the 2nd A on its own and let it ring. Adjust until it reads A3. Flat means wind the peg to raise it; sharp means lower it.
  5. Play the 1st E on its own and let it ring. Adjust until it reads E4. Flat means wind the peg to raise it; sharp means lower it.
  6. Go round once more. Tightening one string changes the tension on the neck, which pulls the others slightly out — this is normal, and why one pass is rarely enough.

Questions

What notes is mandolin and banjo irish tenor banjo tuning?
G2 D3 A3 E4, from the lowest string to the highest. At A=440 that is G2 98 Hz, D3 146.83 Hz, A3 220 Hz, E4 329.63 Hz.
Do I need to download anything?
No. It runs in the browser and uses your microphone. Nothing is uploaded and nothing is recorded — the audio is analysed on your device and discarded frame by frame.
Can I tune without hearing?
Yes. The reading is reported three ways from a single measurement: on screen, spoken aloud, and as vibration where the pulse rate is how far out you are and one long steady buzz means in tune. Every state is a shape before it is a colour, so it also works if you are colourblind. You can tune with the screen off.
Can I change the reference pitch away from 440?
Yes, anywhere from 415 to 446 Hz. Baroque ensembles often use 415, many orchestras 442 or 443, and if you are playing along with a piano that has drifted then matching it beats being right on your own.

4-string banjo tunings

4-string banjos come in several kinds, and each has its own tuning. Tenor and Irish tenor are in fifths, like a viola or mandolin; plectrum and Chicago tunings borrow from the 5-string and the guitar.

Tunings

TuningNotes (4th string first)What it is for
Tenor banjoC G D AC3 G3 D4 A4Pitch: 2nd highest of 4Jazz and ragtime. Fifths, like a viola or mandola.
Irish tenor banjoThis tuningG D A EG2 D3 A3 E4Pitch: lowest of 4Irish traditional music. Fifths, like a mandolin an octave lower.
Chicago (guitar) tuningD G B ED3 G3 B3 E4Pitch: highest of 4The top four guitar strings. Easy for guitarists.
Plectrum banjoC G B DC3 G3 B3 D4Pitch: 2nd lowest of 4Jazz and vintage plectrum style. Like 5-string C tuning without the short 5th.

Good to know

In short: Pick the tuning that matches the kind of 4-string banjo you have and the music you play: tenor for jazz, Irish tenor for trad, plectrum for vintage jazz, Chicago if you come from guitar.

Tuning something else?

Every tuning in one list — 289 of them, across 10 kinds of instrument.

In tune. Now what?

The same microphone that just told you your mandolin and banjo was flat can turn what you play into an editable part. Play a line in — sung, hummed, whistled, on a lead, over MIDI, typed, or stepped through with a single switch — and it writes the notes out onto a track you can move around, alongside drums you can build the same way.

Free, in the browser, nothing uploaded. Built so it works without sight, without hearing, or with a single switch as the only input.

Open the studio