Violin family

Cello, Bach Suite No. 5 tuner

C2 G2 D3 G3

Violin family cello, bach suite no. 5 tuning is C2 G2 D3 G3, from C2 at 65.41 Hz up to G3 at 196 Hz. Play a string and this page tells you which one it is and how far out you are.

What it is for: The top string down a whole step, for Bach's Cello Suite No. 5.

Loading the tuner…

Cello, Bach Suite No. 5 string notes and frequencies

At the standard reference pitch of A = 440 Hz. The tuner can be set from 415 to 446.
StringNoteFrequency
4th CC265.41 Hz
3rd GG298 Hz
2nd DD3146.83 Hz
1st GG3196 Hz

How to tune to Cello, Bach Suite No. 5

  1. Press Start tuning and allow the microphone.
  2. Play the 4th C on its own and let it ring. Adjust until it reads C2. Flat means wind the peg to raise it; sharp means lower it.
  3. Play the 3rd G on its own and let it ring. Adjust until it reads G2. Flat means wind the peg to raise it; sharp means lower it.
  4. Play the 2nd D on its own and let it ring. Adjust until it reads D3. Flat means wind the peg to raise it; sharp means lower it.
  5. Play the 1st G on its own and let it ring. Adjust until it reads G3. Flat means wind the peg to raise it; sharp means lower it.
  6. Go round once more. Tightening one string changes the tension on the neck, which pulls the others slightly out — this is normal, and why one pass is rarely enough.

Questions

What notes is violin family cello, bach suite no. 5 tuning?
C2 G2 D3 G3, from the lowest string to the highest. At A=440 that is C2 65.41 Hz, G2 98 Hz, D3 146.83 Hz, G3 196 Hz.
Do I need to download anything?
No. It runs in the browser and uses your microphone. Nothing is uploaded and nothing is recorded — the audio is analysed on your device and discarded frame by frame.
Can I tune without hearing?
Yes. The reading is reported three ways from a single measurement: on screen, spoken aloud, and as vibration where the pulse rate is how far out you are and one long steady buzz means in tune. Every state is a shape before it is a colour, so it also works if you are colourblind. You can tune with the screen off.
Can I change the reference pitch away from 440?
Yes, anywhere from 415 to 446 Hz. Baroque ensembles often use 415, many orchestras 442 or 443, and if you are playing along with a piano that has drifted then matching it beats being right on your own.

Cello tunings

Standard cello tuning is C G D A (C2 G2 D3 A3), low to high: the same note names as the viola, an octave lower. All perfect fifths.

Most common

TuningNotes (low to high)What it is for
CelloC G D AC2 G2 D3 A3Pitch: highest of 2The default for virtually all repertoire.

Other tunings

TuningNotes (low to high)What it is for
Cello, Bach Suite No. 5This tuningC G D GC2 G2 D3 G3Pitch: lowest of 2The top string down a whole step, for Bach's Cello Suite No. 5.

A few other Baroque scordatura works exist, and are almost never played outside those pieces.

The violin family at a glance

InstrumentStandard (low to high)IntervalsRelation
ViolinG3 D4 A4 E5Fifths—
ViolaC3 G3 D4 A4FifthsA fifth below the violin
CelloC2 G2 D3 A3FifthsAn octave below the viola
Double bassE1 A1 D2 G2FourthsIts highest string matches the cello's G

Violin, viola and cello stay in fifths and almost never leave standard tuning. The double bass is the exception: fourths, plus solo tuning, C extensions and 5-string setups, because orchestral writing often goes below its low E.

Good to know

In short: Cellos stay in C G D A for virtually all repertoire.

Tuning something else?

Every tuning in one list — 289 of them, across 10 kinds of instrument.

In tune. Now what?

The same microphone that just told you your violin family was flat can turn what you play into an editable part. Play a line in — sung, hummed, whistled, on a lead, over MIDI, typed, or stepped through with a single switch — and it writes the notes out onto a track you can move around, alongside drums you can build the same way.

Free, in the browser, nothing uploaded. Built so it works without sight, without hearing, or with a single switch as the only input.

Open the studio