Guitar

Baritone, B standard tuner

B1 E2 A2 D3 F♯3 B3

Guitar baritone, b standard tuning is B1 E2 A2 D3 F♯3 B3, from B1 at 61.74 Hz up to B3 at 246.94 Hz. Play a string and this page tells you which one it is and how far out you are.

What it is for: The most common baritone tuning: a 6-string a fourth lower, with the same shapes.

Loading the tuner…

Baritone, B standard string notes and frequencies

At the standard reference pitch of A = 440 Hz. The tuner can be set from 415 to 446.
StringNoteFrequency
6th BB161.74 Hz
5th EE282.41 Hz
4th AA2110 Hz
3rd DD3146.83 Hz
2nd F♯F♯3185 Hz
1st BB3246.94 Hz

How to tune to Baritone, B standard

  1. Press Start tuning and allow the microphone.
  2. Play the 6th B on its own and let it ring. Adjust until it reads B1. Flat means wind the peg to raise it; sharp means lower it.
  3. Play the 5th E on its own and let it ring. Adjust until it reads E2. Flat means wind the peg to raise it; sharp means lower it.
  4. Play the 4th A on its own and let it ring. Adjust until it reads A2. Flat means wind the peg to raise it; sharp means lower it.
  5. Play the 3rd D on its own and let it ring. Adjust until it reads D3. Flat means wind the peg to raise it; sharp means lower it.
  6. Play the 2nd F♯ on its own and let it ring. Adjust until it reads F♯3. Flat means wind the peg to raise it; sharp means lower it.
  7. Play the 1st B on its own and let it ring. Adjust until it reads B3. Flat means wind the peg to raise it; sharp means lower it.
  8. Go round once more. Tightening one string changes the tension on the neck, which pulls the others slightly out — this is normal, and why one pass is rarely enough.

Questions

What notes is guitar baritone, b standard tuning?
B1 E2 A2 D3 F♯3 B3, from the lowest string to the highest. At A=440 that is B1 61.74 Hz, E2 82.41 Hz, A2 110 Hz, D3 146.83 Hz, F♯3 185 Hz, B3 246.94 Hz.
Do I need to download anything?
No. It runs in the browser and uses your microphone. Nothing is uploaded and nothing is recorded — the audio is analysed on your device and discarded frame by frame.
Can I tune without hearing?
Yes. The reading is reported three ways from a single measurement: on screen, spoken aloud, and as vibration where the pulse rate is how far out you are and one long steady buzz means in tune. Every state is a shape before it is a colour, so it also works if you are colourblind. You can tune with the screen off.
Can I change the reference pitch away from 440?
Yes, anywhere from 415 to 446 Hz. Baroque ensembles often use 415, many orchestras 442 or 443, and if you are playing along with a piano that has drifted then matching it beats being right on your own.
Does it work with a capo?
Yes. Set the capo fret in Setup and the tuner keeps calling your sixth string the sixth string, instead of insisting you are several semitones sharp.

Baritone guitar tunings

A baritone guitar is built to be tuned lower than a standard guitar. The most common tuning is B standard, B E A D F♯ B (B1 E2 A2 D3 F♯3 B3): a 6-string a fourth lower, so every chord and scale shape works exactly as usual.

Standard tuning

TuningNotes (lowest string (6th) first)What it is for
Baritone, B standardThis tuningB E A D F♯ BB1 E2 A2 D3 F♯3 B3The most common baritone tuning: a 6-string a fourth lower, with the same shapes.

Good to know

In short: B standard is the usual baritone tuning. For even lower tunings, look at the 7-string and 8-string tunings above, which reach the same range with more strings.

Tuning something else?

Every tuning in one list — 289 of them, across 10 kinds of instrument.

In tune. Now what?

The same microphone that just told you your guitar was flat can turn what you play into an editable part. Play a line in — sung, hummed, whistled, on a lead, over MIDI, typed, or stepped through with a single switch — and it writes the notes out onto a track you can move around, alongside drums you can build the same way.

Free, in the browser, nothing uploaded. Built so it works without sight, without hearing, or with a single switch as the only input.

Open the studio