Anything else
C harmonica, blow notes tuner
C4 E4 G4 C5 E5 G5 C6 E6 G6 C7
Anything else c harmonica, blow notes tuning is C4 E4 G4 C5 E5 G5 C6 E6 G6 C7, from C4 at 261.63 Hz up to C7 at 2093 Hz. Play a string and this page tells you which one it is and how far out you are.
What it is for: Check each hole, blowing.
Loading the tuner…
This instrument cannot be retuned while you play, so the tuner checks it rather than tuning it. A note far from where it should be needs a repair technician, not a stronger breath or strike.
C harmonica, blow notes string notes and frequencies
How to tune to C harmonica, blow notes
- Press Start tuning and allow the microphone.
- Play the Hole 1 blow on its own and let it ring. Adjust until it reads C4. Flat means wind the peg to raise it; sharp means lower it.
- Play the Hole 2 blow on its own and let it ring. Adjust until it reads E4. Flat means wind the peg to raise it; sharp means lower it.
- Play the Hole 3 blow on its own and let it ring. Adjust until it reads G4. Flat means wind the peg to raise it; sharp means lower it.
- Play the Hole 4 blow on its own and let it ring. Adjust until it reads C5. Flat means wind the peg to raise it; sharp means lower it.
- Play the Hole 5 blow on its own and let it ring. Adjust until it reads E5. Flat means wind the peg to raise it; sharp means lower it.
- Play the Hole 6 blow on its own and let it ring. Adjust until it reads G5. Flat means wind the peg to raise it; sharp means lower it.
- Play the Hole 7 blow on its own and let it ring. Adjust until it reads C6. Flat means wind the peg to raise it; sharp means lower it.
- Play the Hole 8 blow on its own and let it ring. Adjust until it reads E6. Flat means wind the peg to raise it; sharp means lower it.
- Play the Hole 9 blow on its own and let it ring. Adjust until it reads G6. Flat means wind the peg to raise it; sharp means lower it.
- Play the Hole 10 blow on its own and let it ring. Adjust until it reads C7. Flat means wind the peg to raise it; sharp means lower it.
- Go round once more. Tightening one string changes the tension on the neck, which pulls the others slightly out — this is normal, and why one pass is rarely enough.
Questions
- What notes is anything else c harmonica, blow notes tuning?
- C4 E4 G4 C5 E5 G5 C6 E6 G6 C7, from the lowest string to the highest. At A=440 that is C4 261.63 Hz, E4 329.63 Hz, G4 392 Hz, C5 523.25 Hz, E5 659.26 Hz, G5 783.99 Hz, C6 1046.5 Hz, E6 1318.51 Hz, G6 1567.98 Hz, C7 2093 Hz.
- Do I need to download anything?
- No. It runs in the browser and uses your microphone. Nothing is uploaded and nothing is recorded — the audio is analysed on your device and discarded frame by frame.
- Can I tune without hearing?
- Yes. The reading is reported three ways from a single measurement: on screen, spoken aloud, and as vibration where the pulse rate is how far out you are and one long steady buzz means in tune. Every state is a shape before it is a colour, so it also works if you are colourblind. You can tune with the screen off.
- Can I change the reference pitch away from 440?
- Yes, anywhere from 415 to 446 Hz. Baroque ensembles often use 415, many orchestras 442 or 443, and if you are playing along with a piano that has drifted then matching it beats being right on your own.
Harmonica in C (10-hole diatonic) tunings
A 10-hole diatonic harmonica plays one major scale, split between blowing and drawing. You cannot retune it while playing: this checks how far each note is from where it should be.
Most common
| Tuning | Notes | What it is for |
|---|---|---|
| C harmonica, blow notesThis tuning | C E G C E G C E G CC4 E4 G4 C5 E5 G5 C6 E6 G6 C7Pitch: lowest of 2 | Check each hole, blowing. |
Other tunings
| Tuning | Notes | What it is for |
|---|---|---|
| C harmonica, draw notes | D G B D F A B D F AD4 G4 B4 D5 F5 A5 B5 D6 F6 A6Pitch: highest of 2 | Check each hole, drawing (breathing in). |
Good to know
- Many harmonicas are made a little sharp of A = 440, often 442. If every note reads a few cents sharp, set the reference pitch to match.
- Play gently. Blowing hard bends a harmonica's notes flat.
- A note that is far out is a reed that has moved. A harmonica repair technician can retune it.
- For a harmonica in another key, choose a tuning and use Shift this one, under Your own tunings, to move it.
- This instrument cannot be retuned while you play, so the tuner checks it rather than tuning it. A note far from where it should be needs a repair technician, not a stronger breath or strike.
Tuning something else?
- Guitar37 tunings · starts with Standard
- Bass guitar33 tunings · starts with 4-string standard
- Ukulele8 tunings · starts with Standard, re-entrant
- Violin family15 tunings · starts with Violin
- Mandolin and banjo17 tunings · starts with Mandolin
- Woodwinds33 tunings · starts with Flute, band tuning
- Brass28 tunings · starts with Trumpet, band tuning
- Voice13 tunings · starts with Voice, any note
- Drums5 tunings · starts with Rock kit, 3 toms
Every tuning in one list — 289 of them, across 10 kinds of instrument.
In tune. Now what?
The same microphone that just told you your anything else was flat can turn what you play into an editable part. Play a line in — sung, hummed, whistled, on a lead, over MIDI, typed, or stepped through with a single switch — and it writes the notes out onto a track you can move around, alongside drums you can build the same way.
Free, in the browser, nothing uploaded. Built so it works without sight, without hearing, or with a single switch as the only input.
Open the studio