Anything else

Lute (Renaissance), in A tuner

A2 D3 G3 B3 E4 A4

Anything else lute (renaissance), in a tuning is A2 D3 G3 B3 E4 A4, from A2 at 110 Hz up to A4 at 440 Hz. Play a string and this page tells you which one it is and how far out you are.

What it is for: The same gaps a step higher, for a smaller lute.

Loading the tuner…

Tune one string at a time and let it ring. To go sharper, tighten the string; to go flatter, loosen the string.

Lute (Renaissance), in A string notes and frequencies

At the standard reference pitch of A = 440 Hz. The tuner can be set from 415 to 446.
StringNoteFrequency
6th AA2110 Hz
5th DD3146.83 Hz
4th GG3196 Hz
3rd BB3246.94 Hz
2nd EE4329.63 Hz
1st AA4440 Hz

How to tune to Lute (Renaissance), in A

  1. Press Start tuning and allow the microphone.
  2. Play the 6th A on its own and let it ring. Adjust until it reads A2. Flat means wind the peg to raise it; sharp means lower it.
  3. Play the 5th D on its own and let it ring. Adjust until it reads D3. Flat means wind the peg to raise it; sharp means lower it.
  4. Play the 4th G on its own and let it ring. Adjust until it reads G3. Flat means wind the peg to raise it; sharp means lower it.
  5. Play the 3rd B on its own and let it ring. Adjust until it reads B3. Flat means wind the peg to raise it; sharp means lower it.
  6. Play the 2nd E on its own and let it ring. Adjust until it reads E4. Flat means wind the peg to raise it; sharp means lower it.
  7. Play the 1st A on its own and let it ring. Adjust until it reads A4. Flat means wind the peg to raise it; sharp means lower it.
  8. Go round once more. Tightening one string changes the tension on the neck, which pulls the others slightly out — this is normal, and why one pass is rarely enough.

Questions

What notes is anything else lute (renaissance), in a tuning?
A2 D3 G3 B3 E4 A4, from the lowest string to the highest. At A=440 that is A2 110 Hz, D3 146.83 Hz, G3 196 Hz, B3 246.94 Hz, E4 329.63 Hz, A4 440 Hz.
Do I need to download anything?
No. It runs in the browser and uses your microphone. Nothing is uploaded and nothing is recorded — the audio is analysed on your device and discarded frame by frame.
Can I tune without hearing?
Yes. The reading is reported three ways from a single measurement: on screen, spoken aloud, and as vibration where the pulse rate is how far out you are and one long steady buzz means in tune. Every state is a shape before it is a colour, so it also works if you are colourblind. You can tune with the screen off.
Can I change the reference pitch away from 440?
Yes, anywhere from 415 to 446 Hz. Baroque ensembles often use 415, many orchestras 442 or 443, and if you are playing along with a piano that has drifted then matching it beats being right on your own.

Renaissance lute tunings

The main plucked instrument of the Renaissance, with paired strings (courses) and gut frets. The six-course lute is tuned like a guitar with the third string lowered, in several keys. Pitch varied by place and period.

Most common

TuningNotesWhat it is for
Lute (Renaissance), in GG C F A D GG2 C3 F3 A3 D4 G4Pitch: 2nd lowest of 3The usual modern tuning for a six-course lute.

Other tunings

TuningNotesWhat it is for
Lute (Renaissance), in AThis tuningA D G B E AA2 D3 G3 B3 E4 A4Pitch: highest of 3The same gaps a step higher, for a smaller lute.
Lute (Renaissance), in E (vihuela)E A D F♯ B EE2 A2 D3 F♯3 B3 E4Pitch: lowest of 3The same gaps starting on E: a guitar with the 3rd string lowered to F♯.

Good to know

Tuning something else?

Every tuning in one list — 289 of them, across 10 kinds of instrument.

In tune. Now what?

The same microphone that just told you your anything else was flat can turn what you play into an editable part. Play a line in — sung, hummed, whistled, on a lead, over MIDI, typed, or stepped through with a single switch — and it writes the notes out onto a track you can move around, alongside drums you can build the same way.

Free, in the browser, nothing uploaded. Built so it works without sight, without hearing, or with a single switch as the only input.

Open the studio