Brass

Mellophone (F): check across the range

C4 G4 C5

Mellophone (F), check across the range: written C4 (sounds F3, 174.61 Hz), then written G4 (sounds C4, 261.63 Hz), then written C5 (sounds F4, 349.23 Hz). To go sharper, push the main tuning slide in a little; to go flatter, pull the main tuning slide out a little.

What it is for: After tuning, play these low to high. If one part of the range is out while the rest is in, the slide cannot fix it: that note is placed with the lips and air, and players learn to lean it as they play.

Loading the tuner…

Warm up for a minute first: a cold instrument plays flat, and it rises as it warms. To go sharper, push the main tuning slide in a little; to go flatter, pull the main tuning slide out a little.

Notes, as written and as they sound

At the standard reference pitch of A = 440 Hz. The tuner can be set from 415 to 446.
NoteWrittenSoundsFrequency
Low CC4F3174.61 Hz
Open GG4C4261.63 Hz
Open CC5F4349.23 Hz

How to tune to Mellophone, check across the range

  1. Press Start tuning and allow the microphone.
  2. Warm up first: play for a minute or two. A cold instrument plays flat.
  3. Play the low c, C4 (it sounds F3), as a long steady note. If it is flat, push the main tuning slide in a little; if it is sharp, pull the main tuning slide out a little.
  4. Play the open g, G4 (it sounds C4), as a long steady note. It should now be close. If it is not, play it the way the music needs rather than moving the slide or barrel again.
  5. Play the open c, C5 (it sounds F4), as a long steady note. It should now be close. If it is not, play it the way the music needs rather than moving the slide or barrel again.
  6. Check again after a few minutes of playing: the instrument keeps warming up, and warmer plays sharper.

Questions

What notes is brass mellophone, check across the range tuning?
C4 G4 C5, from the lowest string to the highest. At A=440 that is C4 174.61 Hz, G4 261.63 Hz, C5 349.23 Hz.
Do I need to download anything?
No. It runs in the browser and uses your microphone. Nothing is uploaded and nothing is recorded — the audio is analysed on your device and discarded frame by frame.
Can I tune without hearing?
Yes. The reading is reported three ways from a single measurement: on screen, spoken aloud, and as vibration where the pulse rate is how far out you are and one long steady buzz means in tune. Every state is a shape before it is a colour, so it also works if you are colourblind. You can tune with the screen off.
Can I change the reference pitch away from 440?
Yes, anywhere from 415 to 446 Hz. Baroque ensembles often use 415, many orchestras 442 or 443, and if you are playing along with a piano that has drifted then matching it beats being right on your own.
Why does a tuner say F3 when I play C4?
Because this is a transposing instrument: its written notes sound lower or higher than they are written. This tuner names notes as written for your instrument, and shows the sounding (concert) note beside it. Most other tuners show only the concert note. You can switch to concert names in the settings.
Why does my instrument start flat and creep sharp?
Temperature. Warm breath warms the air inside, and warmer air plays sharper. Play for a minute or two before tuning, and tune again after a long rest.

Mellophone (F) tunings

Mellophone (F) is tuned with its main tuning slide: push the main tuning slide in a little to go sharper, pull the main tuning slide out a little to go flatter. That moves every note at once, so you tune one note (a band's concert B♭, or the orchestra's A) and then check a few others. It is a transposing instrument: its written C sounds F, 7 piano keys lower (counting the black keys). This tuner names notes as written, so they match your part, and shows what they sound as alongside.

Most common

TuningNotes (tuning note first)What it is for
Mellophone, band tuningF4 C5 · sounds B♭3 F4How bands tune: a concert B♭, then a concert F. On a mellophone that is written F4 (it sounds B♭3), then written C5 (it sounds F4).

Other tunings

TuningNotes (tuning note first)What it is for
Mellophone, check across the rangeThis tuningC4 G4 C5 · sounds F3 C4 F4After tuning, play these low to high. If one part of the range is out while the rest is in, the slide cannot fix it: that note is placed with the lips and air, and players learn to lean it as they play.

Transposing instruments at a glance

InstrumentWritten C soundsThe band's concert B♭ is written
FluteC (as written)B♭
PiccoloC, an octave higherB♭
OboeC (as written)B♭
B♭ clarinetB♭C
A clarinetAC♯
E♭ clarinetE♭, higherG
Bass clarinetB♭, an octave lowerC
BassoonC (as written)B♭
Soprano saxophoneB♭C
Alto saxophoneE♭G
Tenor saxophoneB♭, an octave lowerC
Baritone saxophoneE♭, an octave lowerG
Soprano (descant) recorderC, an octave higherB♭
Alto (treble) recorderC (as written)B♭
Trumpet or cornet (B♭)B♭C
C trumpetC (as written)B♭
Flugelhorn (B♭)B♭C
French horn (F)FF
Mellophone (F)FF
TromboneC (as written)B♭
Bass tromboneC (as written)B♭
Euphonium or baritone hornC (as written)B♭
Tuba or sousaphone (B♭)C (as written)B♭
C tubaC (as written)B♭

A conductor, a piano player and most tuners name the sounding note, called concert pitch. A part for a transposing instrument is written so the same fingering reads the same on every size of saxophone or clarinet. Both are right; they are two names for one sound.

Good to know

In short: Tune one note with the main tuning slide, then check the range. The main tuning slide moves every note together; a single note that stays out is placed by how you play it.

Tuning something else?

Every tuning in one list — 289 of them, across 10 kinds of instrument.

In tune. Now what?

The same microphone that just told you your brass was flat can turn what you play into an editable part. Play a line in — sung, hummed, whistled, on a lead, over MIDI, typed, or stepped through with a single switch — and it writes the notes out onto a track you can move around, alongside drums you can build the same way.

Free, in the browser, nothing uploaded. Built so it works without sight, without hearing, or with a single switch as the only input.

Open the studio