Ukulele

Baritone, re-entrant high D tuner

D4 G3 B3 E4

Ukulele baritone, re-entrant high d tuning is D4 G3 B3 E4, from G3 at 196 Hz up to E4 at 329.63 Hz. Play a string and this page tells you which one it is and how far out you are.

What it is for: Rare. The 4th string an octave higher, for a brighter baritone.

Loading the tuner…

The 4th string is HIGHER than the 3rd — that is correct, not a mistake.

Baritone, re-entrant high D string notes and frequencies

At the standard reference pitch of A = 440 Hz. The tuner can be set from 415 to 446.
StringNoteFrequency
4th DD4293.66 Hz
3rd GG3196 Hz
2nd BB3246.94 Hz
1st EE4329.63 Hz

How to tune to Baritone, re-entrant high D

  1. Press Start tuning and allow the microphone.
  2. Play the 4th D on its own and let it ring. Adjust until it reads D4. Flat means wind the peg to raise it; sharp means lower it.
  3. Play the 3rd G on its own and let it ring. Adjust until it reads G3. Flat means wind the peg to raise it; sharp means lower it.
  4. Play the 2nd B on its own and let it ring. Adjust until it reads B3. Flat means wind the peg to raise it; sharp means lower it.
  5. Play the 1st E on its own and let it ring. Adjust until it reads E4. Flat means wind the peg to raise it; sharp means lower it.
  6. Go round once more. Tightening one string changes the tension on the neck, which pulls the others slightly out — this is normal, and why one pass is rarely enough.

Questions

What notes is ukulele baritone, re-entrant high d tuning?
D4 G3 B3 E4, from the lowest string to the highest. At A=440 that is D4 293.66 Hz, G3 196 Hz, B3 246.94 Hz, E4 329.63 Hz.
Do I need to download anything?
No. It runs in the browser and uses your microphone. Nothing is uploaded and nothing is recorded — the audio is analysed on your device and discarded frame by frame.
Can I tune without hearing?
Yes. The reading is reported three ways from a single measurement: on screen, spoken aloud, and as vibration where the pulse rate is how far out you are and one long steady buzz means in tune. Every state is a shape before it is a colour, so it also works if you are colourblind. You can tune with the screen off.
Can I change the reference pitch away from 440?
Yes, anywhere from 415 to 446 Hz. Baroque ensembles often use 415, many orchestras 442 or 443, and if you are playing along with a piano that has drifted then matching it beats being right on your own.

Baritone ukulele tunings

Standard baritone ukulele tuning is D G B E (D3 G3 B3 E4), from the 4th string to the 1st: the same as the top four strings of a guitar. It is linear (low to high), so it sounds deeper and more guitar-like than a smaller ukulele.

Most common

TuningNotes (4th string (top) to 1st)What it is for
BaritoneD G B ED3 G3 B3 E4Pitch: lowest of 2Standard for baritone ukuleles. The same as the top four strings of a guitar.

Other tunings

TuningNotes (4th string (top) to 1st)What it is for
Baritone, re-entrant high DThis tuningD G B ED4 G3 B3 E4Pitch: highest of 2Rare. The 4th string an octave higher, for a brighter baritone.

With the right strings a baritone can also be tuned to G C E A, high or low G, if you want standard ukulele chord shapes on a baritone body.

Good to know

In short: D G B E is how nearly every baritone ukulele is tuned. It is its own instrument, with guitar-style tuning.

Tuning something else?

Every tuning in one list — 289 of them, across 10 kinds of instrument.

In tune. Now what?

The same microphone that just told you your ukulele was flat can turn what you play into an editable part. Play a line in — sung, hummed, whistled, on a lead, over MIDI, typed, or stepped through with a single switch — and it writes the notes out onto a track you can move around, alongside drums you can build the same way.

Free, in the browser, nothing uploaded. Built so it works without sight, without hearing, or with a single switch as the only input.

Open the studio