Violin family

Viola tuner

C3 G3 D4 A4

Violin family viola tuning is C3 G3 D4 A4, from C3 at 130.81 Hz up to A4 at 440 Hz. Play a string and this page tells you which one it is and how far out you are.

What it is for: The default for virtually all repertoire.

Loading the tuner…

Viola string notes and frequencies

At the standard reference pitch of A = 440 Hz. The tuner can be set from 415 to 446.
StringNoteFrequency
4th CC3130.81 Hz
3rd GG3196 Hz
2nd DD4293.66 Hz
1st AA4440 Hz

How to tune to Viola

  1. Press Start tuning and allow the microphone.
  2. Play the 4th C on its own and let it ring. Adjust until it reads C3. Flat means wind the peg to raise it; sharp means lower it.
  3. Play the 3rd G on its own and let it ring. Adjust until it reads G3. Flat means wind the peg to raise it; sharp means lower it.
  4. Play the 2nd D on its own and let it ring. Adjust until it reads D4. Flat means wind the peg to raise it; sharp means lower it.
  5. Play the 1st A on its own and let it ring. Adjust until it reads A4. Flat means wind the peg to raise it; sharp means lower it.
  6. Go round once more. Tightening one string changes the tension on the neck, which pulls the others slightly out — this is normal, and why one pass is rarely enough.

Questions

What notes is violin family viola tuning?
C3 G3 D4 A4, from the lowest string to the highest. At A=440 that is C3 130.81 Hz, G3 196 Hz, D4 293.66 Hz, A4 440 Hz.
Do I need to download anything?
No. It runs in the browser and uses your microphone. Nothing is uploaded and nothing is recorded — the audio is analysed on your device and discarded frame by frame.
Can I tune without hearing?
Yes. The reading is reported three ways from a single measurement: on screen, spoken aloud, and as vibration where the pulse rate is how far out you are and one long steady buzz means in tune. Every state is a shape before it is a colour, so it also works if you are colourblind. You can tune with the screen off.
Can I change the reference pitch away from 440?
Yes, anywhere from 415 to 446 Hz. Baroque ensembles often use 415, many orchestras 442 or 443, and if you are playing along with a piano that has drifted then matching it beats being right on your own.

Viola tunings

Standard viola tuning is C G D A (C3 G3 D4 A4), low to high: a fifth below the violin, all perfect fifths.

Most common

TuningNotes (low to high)What it is for
ViolaThis tuningC G D AC3 G3 D4 A4Pitch: lowest of 2The default for virtually all repertoire.

Other tunings

TuningNotes (low to high)What it is for
Viola, a half step upD♭ A♭ E♭ B♭D♭3 A♭3 E♭4 B♭4Pitch: highest of 2Mozart's Sinfonia Concertante and some Classical concertos, so the open strings ring more.

Rare modern scordatura, such as raising the two lowest strings a half step, exists but is not general practice.

The violin family at a glance

InstrumentStandard (low to high)IntervalsRelation
ViolinG3 D4 A4 E5Fifths—
ViolaC3 G3 D4 A4FifthsA fifth below the violin
CelloC2 G2 D3 A3FifthsAn octave below the viola
Double bassE1 A1 D2 G2FourthsIts highest string matches the cello's G

Violin, viola and cello stay in fifths and almost never leave standard tuning. The double bass is the exception: fourths, plus solo tuning, C extensions and 5-string setups, because orchestral writing often goes below its low E.

Good to know

In short: Violas stay in C G D A for virtually all repertoire.

Tuning something else?

Every tuning in one list — 289 of them, across 10 kinds of instrument.

In tune. Now what?

The same microphone that just told you your violin family was flat can turn what you play into an editable part. Play a line in — sung, hummed, whistled, on a lead, over MIDI, typed, or stepped through with a single switch — and it writes the notes out onto a track you can move around, alongside drums you can build the same way.

Free, in the browser, nothing uploaded. Built so it works without sight, without hearing, or with a single switch as the only input.

Open the studio